Frequently Bought Together
Screw-Together Case Kit for WisMesh Board ONE Meshtastic Devices
The Ultimate Screw-Together Case for Your WisMesh Board ONE
Go from a bare board to a durable, field-ready device. This compact, screw-secured enclosure is custom-designed to house your WisMesh Board ONE and a 2000mAh battery, turning your project into a professional and portable Meshtastic node.
Key Features:
- Rock-Solid Durability: The screw-together design ensures your valuable board is protected and won't pop open during rugged use.
- Pocket-Sized Form Factor: Compact and easy to carry, perfect for mobile applications.
- Designed for Long Battery Life: Perfectly fits a 2000mAh MakerNova LiPo battery for multi-day operation.
- External Antenna Ready: Includes a dedicated SMA port for connecting high-performance LoRa antennas.
This is a DIY Kit for Makers!
This product requires soldering and experience with electronics. By purchasing, you confirm you have the technical ability to assemble the components. A functioning WisMesh Board ONE is required.
Step 1: Choose Your Kit
Select the kit that matches your needs. All kits include the case, switch, wiring pigtail, and assembly screws.
| Kit Model | Clip Style | Antenna Included? |
|---|---|---|
| Case Kit (Baofeng) | Baofeng Belt Clip | No |
| Case Kit (MOLLE) | MOLLE Clip | No |
| Complete Kit | Baofeng (or Molle by request) | Yes (Gizont 915MHz) |
Step 2: Get Your Additional Hardware
You will need these parts to complete your project. This case is designed around them for a perfect fit.
Required Components:
- A functioning WisMesh Board ONE
- Battery: 2000mAh MakerNova LiPo Battery
- LoRa Pigtail: IPEX1 to SMA Adapter Cable
- An external LoRa antenna (if not purchasing the Complete Kit)
Assembly & Wiring Guide (Read Before Building)
Important: Basic soldering skills are required. Review all steps before beginning.
1. Battery & Switch Wiring
SAFETY FIRST: Cutting battery wires requires extreme care. Do NOT let the red (+) and black (–) wires touch after cutting to avoid a dangerous short circuit.
- Prepare Wires: Cut the connector off your battery. Strip ~3-4mm from the battery's red and black wires, and from the included JST-PH pigtail wires.
- Wire the Switch (Positive +): Solder the battery's red wire to one of the outer pins on the switch. Solder the pigtail's red wire to the center pin on the switch.
- Connect Ground (Negative –): Solder the battery's black wire directly to the pigtail's black wire.
- Insulate: Securely cover the soldered ground connection with heat-shrink tubing or electrical tape.
Do not connect the pigtail to the board until final assembly.
2. Final Assembly
- Install the power switch and LoRa SMA pigtail into the case cutouts.
- Mount your WisMesh Board ONE into the case and secure it with screws.
- Use double-sided tape to secure the battery to the inside of the back cover.
- Attach your external LoRa antenna to the SMA connector. This is required before powering on.
- Plug the wired JST pigtail into the board's battery port.
- Close the enclosure and secure it with the final case screws. Test the power switch.
