Complete Your Build
Screw-Together Mini Enclosure for RAK19007 WisBlock Projects and Meshtastic Devices
A Professional Enclosure for Your RAK19007 WisBlock
Build a professional, field-ready Meshtastic node or environmental sensor around your RAK WisBlock with this modular case, designed to support builds with or without an OLED screen.
What Makes It Stand Out
- Screw-together assembly stays secure and won't pop open during rugged use
- Pocket-sized form factor with a detachable belt clip for easy carry
- GPS-ready across every kit, built around a 4000mAh MakerNova battery
This Is NOT a Plug-and-Play Kit
This product is for makers with experience in soldering and electronics. By purchasing, you confirm you are confident in your technical ability to assemble the components. A functioning RAK19007 board is required.
Step One: Choose Your Kit
Select the kit that matches your build. All kits include the screw-together case, clip, all necessary screws, and the essential switch/button set.
| Variant | GPS Ready | Antenna Included | Max Battery | Notes |
|---|---|---|---|---|
| Standard Kit | Yes | No | 4000mAh | Power switch included, no OLED screen |
| Standard + Antenna Kit | Yes | Yes | 4000mAh | Power switch included, ready to assemble with antenna included |
| OLED-Ready Kit | Yes | No | 4000mAh | Power switch and configurable button included, OLED cutout ready for your own screen |
| OLED Complete Kit | Yes | Yes | 4000mAh | Power switch and configurable button included, ready to assemble with OLED screen and antenna included |
Step Two: Select Compatible Hardware
These cases are designed around known-fit parts. Selecting the correct hardware ensures a clean build without trimming or modification.
Required Modules
- RAK19007 (Base Board 2nd Gen) & RAK4631 (BLE/LoRa Core)
- Optional: RAK12500 (GPS) or RAK1904 (3-Axis Sensor)
- 1.3 inch OLED Screen, needed for the "OLED-Ready Kit"
Battery
- Battery: 4000mAh MakerNova LiPo
Antenna
- Antenna (if not in your kit): Gizont 915MHz Whip Antenna
▸ Case Dimensions
- 3.5in x 2in x 1.25in
▸ Included in Every Case Kit
Every Kit
- Durable ASA Enclosure (Screw-Together, Front and Back)
- Detachable belt clip
- All necessary assembly screws
- Power switch / button set
This is a DIY kit for the case, clip, and hardware only. The RAK19007 board, RAK4631 core, WisBlock modules, battery, and antenna must be purchased separately using the guide above.
▸ Assembly Instructions & Wiring Guide
Key Assembly Steps:
- [OLED Version Only] Solder the OLED screen to the VCC, GND, SCL, and SDA pins.
- Solder the toggle switch, user button, and battery leads to the RAK19007 board.
- Install the switch, button bar, and OLED screen (if applicable) into the case front.
- Attach all your WisBlock modules to the base board.
- Secure the board into the case and attach antenna pigtails.
- Mount the battery inside the back cover (e.g., with double-sided tape) and connect the battery.
- Close the two halves of the case and secure them with the four included screws. Do not overtighten.
Warning: Ensure correct polarity when soldering the battery. Do NOT connect the battery until the LoRa antenna is attached.
Wiring Reference:
For ideas on how to wire and program the user button, see Rokland's excellent tutorial: How to Add a User Button to your RAK WisBlock.
Meshtastic® is a registered trademark of Meshtastic LLC. MeshCore is an open-source mesh networking project released under the MIT License, and its name is currently the subject of an unresolved trademark dispute; it is used here only to describe firmware compatibility. Software components referenced in this listing are released under their respective open-source licenses, see GitHub for details. No warranty is provided, use at your own risk.
