Elecrow ThinkNode M4 Meshtastic Power Bank with LoRa and GPS

Elecrow ThinkNode M4 power bank with built-in Meshtastic LoRa node and GPS
ThinkNode M4 power bank feature overview
ThinkNode M4 power bank in everyday use
ThinkNode M4 power bank charging output and power supply
ThinkNode M4 power bank built-in temperature, humidity and motion sensors
Back of the ThinkNode M4 power bank
ThinkNode M4 power bank with LED flashlight
ThinkNode M4 power bank with magnetic wireless charging
ThinkNode M4 power bank
ThinkNode M4 power bank used as a Meshtastic GPS tracker
ThinkNode M4 power bank hardware overview
ThinkNode M4 power bank package contents

Elecrow ThinkNode M4 Meshtastic Power Bank with LoRa and GPS

$79.99 USD $69.99 USD SAVE 13%
  • Secure checkout
  • Fast US shipping
  • 30-day returns

LEFT IN STOCK.

Elecrow ThinkNode M4 Meshtastic Power Bank with LoRa and GPS | Meshtastic, MeshCore, WadaMesh

LIMITED SALE. LIMITED QUANTITIES
Power Bank and Meshtastic Node in One

The ThinkNode M4 is a 7000mAh power bank with a Meshtastic LoRa node and GPS built into the same body, so the battery you already carry also keeps you on the mesh.

Instead of packing a separate radio, a tracker, and a charger, the M4 combines all three. It runs on a Nordic nRF52840 with a Semtech LR1110 LoRa radio and a GPS receiver, and it can still charge your phone over USB-C or wirelessly. It suits hiking, camping, emergency kits, and any trip where cell coverage is not guaranteed.


Key Features

  • 7000mAh nominal (25.2Wh) 18650 Li-ion battery with built-in battery monitoring and overcharge, over-discharge and short-circuit protection
  • Meshtastic LoRa node built into the power bank, with a Semtech LR1110 radio and internal antenna (US 915MHz / EU 868MHz)
  • Nordic nRF52840 processor with Bluetooth LE 5.4 for pairing with the Meshtastic phone app
  • Built-in GPS (GPS, BeiDou, GLONASS, QZSS) for position sharing and track recording
  • USB-C output up to 5V/3A, 9V/2A or 12V/1.5A, plus wireless charging up to 15W (MagSafe-compatible) and reverse charging
  • Onboard temperature, humidity and six-axis motion sensors
  • Built-in LED flashlight with multiple modes
  • Rugged ABS, PC and TPE enclosure that the manufacturer describes as water-, dust- and shock-resistant (no IP rating is published)

What's In The Box

  • 1x Elecrow ThinkNode M4 Power Bank
  • 2x USB-C cables (one for charging, one for programming)
  • 1x USB to USB-C converter
  • 1x User manual

▸ Technical Specifications
Feature Details
MCU Nordic nRF52840, 256KB RAM, 3MB flash plus an external 2MB flash chip
LoRa Radio Semtech LR1110, US 915MHz / EU 868MHz, internal antenna
Bluetooth BLE 5.4
GPS GPS, BeiDou, GLONASS, QZSS, ceramic antenna
Battery 18650 Li-ion, 7000mAh nominal (25.2Wh); rated 3800mAh at 5V/3A output
Power Output Type-C up to 5V/3A, 9V/2A, 12V/1.5A; wireless up to 15W; synchronous boost up to 20W
Power Input 5-12V via USB-C; charging time 3-4 hours
Power Consumption About 45mA idle, 55µA sleep, 175mA transmit, 54mA receive (peak)
Sensors Temperature, humidity, six-axis gyroscope/accelerometer
Enclosure ABS fireproof plastic, PC, TPE
Dimensions 87.3 × 67.7 × 28mm
Operating Temperature 0°C to 40°C (storage: -20°C to 45°C)
Certifications CE and FCC
Firmware Meshtastic compatible

Meshtastic® is a registered trademark of Meshtastic LLC. MeshCore is an open-source mesh networking project released under the MIT License, and its name is currently the subject of an unresolved trademark dispute; it is used here only to describe firmware compatibility. Software components referenced in this listing are released under their respective open-source licenses, see GitHub for details. No warranty is provided for open-source software or firmware, use at your own risk. Hardware is covered by our 30-day return policy. Always follow best practices for Li-ion battery safety, RF regulations in your region, and safe device operation.