<?xml version="1.0" encoding="UTF-8"?>
<urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9" xmlns:image="http://www.google.com/schemas/sitemap-image/1.1">
  <url>
    <loc>https://makernova.io/</loc>
    <changefreq>daily</changefreq>
  </url>
  <url>
    <loc>https://makernova.io/products/gizont-915mhz-40cm-whip-antenna-with-ipex-cable-for-lora-and-meshtastic</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/40cm_Antenna.jpg?v=1756535403</image:loc>
      <image:title>40cm Whip Antenna</image:title>
      <image:caption>Black MakerNova 915MHz 40cm whip antenna standing upright beside a spec card labeled 915MHz US/AU 40cm</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/lilygo-t-beam-v1x-case-tactical-molle</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/bec54704-il_fullxfull.6234493460_16u9.jpg?v=1755502864</image:loc>
      <image:title>LilyGO T-Beam V1.x Case – Tactical MOLLE</image:title>
      <image:caption>Red 3D-printed MakerNova MOLLE case for the LilyGO T-Beam with OLED window, control buttons, and angled black antenna</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/sensecap-card-tracker-t1000-e-holster-for-meshtastic-by-alley-cat</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/23d7e5d3-il_fullxfull.6636572992_15n6.jpg?v=1755502719</image:loc>
      <image:title>SenseCAP Card T1000-E Holster</image:title>
      <image:caption>Two halves of the red wolf-embossed MakerNova holster clip shown beside a red and black paracord wrist lanyard</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-v3-complete-meshtastic-node</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/ca6277e1-il_fullxfull.6431926898_p6rx.jpg?v=1755502207</image:loc>
      <image:title>Heltec V3 Complete Meshtastic Node</image:title>
      <image:caption>Comparison chart of MakerNova Heltec V3 Pocket, Slim, and Slim Pro node cases in red with size and battery specs listed</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/lilygo-t-beam-supreme-case-tactical-molle</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/aee6f345-il_fullxfull.6484292233_bfo5.jpg?v=1755501861</image:loc>
      <image:title>LilyGO T-Beam Supreme Case – Tactical MOLLE</image:title>
      <image:caption>Angled view of the red MakerNova T-Beam Supreme MOLLE case with tinted OLED window, side buttons, and SMA antenna port on top</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/t-deck-plus-rear-cover-battery-upgrade</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/0f691304-il_fullxfull.6636673186_1s80.jpg?v=1755501582</image:loc>
      <image:title>T-Deck Plus Rear Cover</image:title>
      <image:caption>Red LilyGO T-Deck Plus rear cover open to show the 8000mAh MakerNova battery installed inside</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/rak19007-screw-together-case</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/Meshpak0534.jpg?v=1755501368</image:loc>
      <image:title>RAK 19007 Screw-Together Case</image:title>
      <image:caption>Red MakerNova RAK19007 case fully screwed together with OLED showing meshtastic.org, SMA antenna, and kickstand</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/gizont-915mhz-17cm-whip-antenna-with-ipex-cable-for-lora-and-meshtastic</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/d5ae2677-il_fullxfull.6498488765_sk2l.jpg?v=1752218650</image:loc>
      <image:title>17cm Whip Antenna</image:title>
      <image:caption>MakerNova 17cm 915MHz whip antenna standing upright next to a spec card labeled 915 MHz US/AU 17cm</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/case-for-lilygo-t-deck-alley-cat-design</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/4c530085-il_fullxfull.6168148799_i60i.jpg?v=1756533905</image:loc>
      <image:title>Case for Lilygo T-Deck - Alley Cat Design</image:title>
      <image:caption>Olive green MakerNova LilyGO T-Deck case with QWERTY keyboard and antenna attached, OLED showing the Meshtastic startup logo</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-t114-v2-pocket-pro-case</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/8c9fce0b-il_fullxfull.6489961045_e7g0.jpg?v=1755499951</image:loc>
      <image:title>T114 V2.0 Pocket Pro Cases</image:title>
      <image:caption>Side-by-side comparison of the MakerNova T114 Pro SMA case with external antenna and the T114 Pocket Pro case with internal antenna</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-v3-cases-for-running-meshtastic-by-alley-cat</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/e2450d5f-il_fullxfull.6480061725_qinz.jpg?v=1755499789</image:loc>
      <image:title>Heltec V3 Case Collection – Pocket, Slim &amp; Pro Styles</image:title>
      <image:caption>MakerNova Heltec V3 case collection title graphic comparing Pocket, Slim, and Slim Pro sizes with dimensions and battery specs</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/replacement-clips-for-alley-cat-cases-meshtastic</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/d2c7c3d5-il_fullxfull.5953953896_zjfq.jpg?v=1751970345</image:loc>
      <image:title>Replacement Clips for Alley Cat cases. Meshtastic.</image:title>
      <image:caption>3D render of a navy blue MakerNova Meshtastic case with white replacement MOLLE clips and a wolf logo embossed on the end</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/lilygo-t-deck-complete-for-meshtastic-fits-2000mah-or-8000mah-batteries</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/9443f045-il_fullxfull.6480046799_jqwz.jpg?v=1755498774</image:loc>
      <image:title>LilyGO T-Deck Complete Meshtastic Node</image:title>
      <image:caption>T Deck Complete title graphic showing the red MakerNova LilyGO T-Deck node with QWERTY keyboard and 915MHz whip antenna</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-t114-v2-slim-pro-case</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/c19edbbc-il_fullxfull.6431865754_dwei.jpg?v=1755498494</image:loc>
      <image:title>Heltec T114 V2.0 Slim Pro Case</image:title>
      <image:caption>MakerNova Heltec T114 Slim Pro title graphic with red case, antenna, battery options, and Baofeng or belt clip choices</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/lilygo-t-deck-w-sma-snap-case-meshtastic</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/Rugged_T_Deck_Snap.jpg?v=1756534585</image:loc>
      <image:title>Snap-Fit Case for LilyGO T-Deck</image:title>
      <image:caption>Olive green MakerNova snap-fit T-Deck case shown at an angle with QWERTY keyboard and whip antenna attached</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-t114-v2-complete-meshtastic-node</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/6457444f-il_fullxfull.6249504726_3027.jpg?v=1755497944</image:loc>
      <image:title>Heltec T114 V2.0 Complete Meshtastic Node</image:title>
      <image:caption>MakerNova T114 Complete title image with the red case and paracord wrist lanyard, OLED showing the Meshtastic logo</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-t114-v2-pocket-case</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/17c553b7-il_fullxfull.6480077059_geeu.jpg?v=1755497944</image:loc>
      <image:title>Heltec T114 V2.0 Pocket Case</image:title>
      <image:caption>Heltec T114 Pocket SMA case from MakerNova on its stand with external antenna port and OLED showing meshtastic.org</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/field-ready-case-for-lilygo-t-deck</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/Updated_Deck_Cover.jpg?v=1756534690</image:loc>
      <image:title>Field-Ready Case for LilyGO T-Deck</image:title>
      <image:caption>Red MakerNova field-ready T-Deck case angled on its kickstand with QWERTY keyboard and OLED showing meshtastic.org</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/lilygo-t-beam-meshtastic-complete-with-molle-support</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/d60efdc3-il_fullxfull.6110759100_78gb.jpg?v=1755496850</image:loc>
      <image:title>LILYGO T-Beam V1.X Complete Meshtastic Node</image:title>
      <image:caption>Red ribbed MakerNova T-Beam case standing upright with side rails, OLED screen, buttons, and angled whip antenna</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/makernova-2000mah-rechargeable-battery-with-jst-1-25-connector-for-meshtastic-heltec-lilygo-arduino-and-other-devices</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/04.jpg?v=1752219098</image:loc>
      <image:title>MakerNova 2000mAh LiPo Battery with JST 1.25</image:title>
      <image:caption>MakerNova 2000mAh 3.7V LiPo battery with JST 1.25 connector cable and capacity, voltage, discharge rate specs</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/makernova-3000mah-rechargeable-battery-with-jst-1-25-connector-for-meshtastic-heltec-lilygo-arduino-and-other-devices</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/04_c3480f16-c2d7-4aa2-89d6-78d263e2a3bf.jpg?v=1752219069</image:loc>
      <image:title>MakerNova 3000mAh LiPo Battery with JST 1.25</image:title>
      <image:caption>MakerNova 3000mAh 3.7V LiPo battery with JST connector cable and capacity, voltage, discharge rate specs</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/makernova-8000mah-rechargeable-battery-with-jst-1-25-connector-for-meshtastic-heltec-lilygo-arduino-and-other-devices</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/04_7f53660d-79f4-4209-b875-2827b759ff7a.jpg?v=1753342858</image:loc>
      <image:title>MakerNova 8000mAh LiPo Battery with JST 1.25</image:title>
      <image:caption>MakerNova 8000mAh 3.7V LiPo battery with JST connector cable and capacity, voltage, discharge rate specs</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/makernova-4000mah-rechargeable-battery-with-jst-1-25-connector-for-meshtastic-heltec-lilygo-arduino-and-other-devices</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/04_53a62f48-b66e-476e-ba72-8f488fcf423f.jpg?v=1752219006</image:loc>
      <image:title>MakerNova 4000mAh LiPo Battery with JST 1.25</image:title>
      <image:caption>MakerNova 4000mAh 3.7V LiPo battery with JST connector cable and capacity, voltage, discharge rate specs</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/u-fl-to-n-type-passthrough-cable-rf-enclosure-pigtail</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/41091_76f8e647-c1b8-4f35-ba6c-dc105c08a5df.jpg?v=1753938746</image:loc>
      <image:title>U.FL to N-Type Passthrough Cable | RF Enclosure Pigtail</image:title>
      <image:caption>MakerNova U.FL to N-type female passthrough pigtail cable with connector dimensions and rear thread fixing details labeled</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/wismesh-board-one-screw-together-case-kit</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/B1MiniBox006011.jpg?v=1755496064</image:loc>
      <image:title>WisMesh Board ONE Screw-Together Case Kit | DIY Enclosure</image:title>
      <image:caption>MakerNova RAK B1 Mini Box shown in three mounting styles: MOLLE clip, plain white ribbed case, and Baofeng belt clip</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/2dbi-compact-whip-antenna-u-fl-connector-5-pack</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/51aJ21tCc8L._AC_SL1500.jpg?v=1755065266</image:loc>
      <image:title>2dBi Compact Whip Antenna | U.FL Connector (5-Pack)</image:title>
      <image:caption>Five compact MakerNova 2dBi whip antennas with black ribbed bodies and gold U.FL connectors laid diagonally on white</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/baofeng-belt-clip-for-uv-5r</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/619GbbxdYOL._AC_SL1200.jpg?v=1756519962</image:loc>
      <image:title>Baofeng UV-5R Belt Clips | Heavy-Duty Replacements (4-Pack)</image:title>
      <image:caption>Front and back view of a black MakerNova spring-loaded belt clip for the Baofeng UV-5R radio with mounting screw holes</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-t114-gps-module</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/Heltec_T114_GPS_L76K_Chip.jpg?v=1756477621</image:loc>
      <image:title>GPS Module for Heltec T114 and V4 | Plug-and-Play Add-On</image:title>
      <image:caption>Quectel L76K GPS module from MakerNova on a green circuit board with a rainbow ribbon cable and white connector</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/straight-or-90-degree-lora-antenna-pigtail</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/Accessories0063.jpg?v=1755495635</image:loc>
      <image:title>Straight or 90° LoRa Antenna Pigtail</image:title>
      <image:caption>Straight MakerNova U.FL to SMA female bulkhead LoRa antenna pigtail cable with gold connectors on a white background</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-v4-complete-meshtastic-node</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/HeltecV4completekit.jpg?v=1768116913</image:loc>
      <image:title>Heltec V4 Complete Meshtastic Node</image:title>
      <image:caption>MakerNova Heltec V4 ready-to-use kit chart comparing Pocket, Pocket Pro, Slim, and Slim Pro GPS red case styles</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-v4-cases</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/HeltecV4Cover.jpg?v=1763799417</image:loc>
      <image:title>Heltec V4 Case Collection – Pocket, SMA &amp; Pro Styles</image:title>
      <image:caption>MakerNova Heltec V4 case collection title graphic comparing Pocket, Pocket Pro, Slim, and Slim Pro GPS red case styles</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/hglrc-m100-mini-gps-module-10th-gen-ublox-chip</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/51E-aL_gTxL._AC_SL1200.jpg?v=1780395335</image:loc>
      <image:title>HGLRC M100 Mini GPS Module – 10th Gen UBLOX Chip</image:title>
      <image:caption>HGLRC M100 Mini GPS module from MakerNova labeled with GND, 5V, TX, RX pins and a dinosaur logo, shown at an angle</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/stubby-915mhz-lora-antenna-2dbi-u-fl-to-sma-connector</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/41DmUmTUcKL._AC_SL1500.jpg?v=1781586671</image:loc>
      <image:title>Stubby 915MHz LoRa Antenna 2dBi U.FL to SMA Connector</image:title>
      <image:caption>Stubby MakerNova 915MHz LoRa antenna standing upright with a black rubber body and gold SMA male connector</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-tracker-v2-cases-for-running-meshtastic-meshcore-by-alley-cat</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/TrackerV2Title.jpg?v=1784020548</image:loc>
      <image:title>Heltec Tracker V2 Case</image:title>
      <image:caption>Heltec Wireless Tracker Rev 2.0 retail box next to the orange MakerNova Tracker V2 Slim Pro GPS case with dimensions and Baofeng clip</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-t096-cases-for-running-meshtastic-meshcore-by-alley-cat</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/Heltec_T096_cases.jpg?v=1788073218</image:loc>
      <image:title>Heltec T096 Case Collection – Pocket, Slim &amp; Pro Styles</image:title>
      <image:caption>Three red Heltec T096 electronic cases labeled Slim Pro, Pocket Pro, and Pocket Pro SMA on a white background, with text showing battery compatibility for MakerNova 4000mAh and 2000mAh.</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/heltec-t096-complete-meshtastic-node</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/T096_complete.jpg?v=1788073105</image:loc>
      <image:title>Heltec T096 Complete Meshtastic Node</image:title>
      <image:caption>Heltec T096 Ready-to-Use Kit on a white background, showing three red electronic modules labeled Slim Pro, Pocket Pro, and Pocket Pro SMA, with battery size text below.</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/elecrow-thinknode-m9-meshtastic-ready-to-use</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/ThinkNode_M9_a__02.webp?v=1788285292</image:loc>
      <image:title>Elecrow ThinkNode M9 Meshtastic Ready-to-use</image:title>
      <image:caption></image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/sensecap-meshtracker-x1-holster-for-meshtastic</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/Both.jpg?v=1788439054</image:loc>
      <image:title>SenseCAP MeshTracker X1 Holster</image:title>
      <image:caption>Two red MeshTracker X1 holsters shown against a white background, with one holster displaying a black clip and the other showing the side handle. Black text at the top reads &apos;MeshTracker X1 Both Holsters&apos;.</image:caption>
    </image:image>
  </url>
  <url>
    <loc>https://makernova.io/products/elecrow-thinknode-m6-solar-powered-outdoor-meshtastic-node</loc>
    <lastmod>2026-09-11T18:47:18-04:00</lastmod>
    <changefreq>daily</changefreq>
    <image:image>
      <image:loc>https://cdn.shopify.com/s/files/1/0643/4475/2212/files/thinknode_m6_3.jpg?v=1789007934</image:loc>
      <image:title>Elecrow ThinkNode M6 Solar-Powered Outdoor Meshtastic Node</image:title>
      <image:caption>Elecrow ThinkNode M6 solar-powered outdoor Meshtastic node</image:caption>
    </image:image>
  </url>
</urlset>
